Chapter 5 Vlan Configuration; Configuring The Uplink Port Vlan; Table 5-1 Vlan Specifications - Zte ZXA10 C300 Configuration Manual

Chapter 5
VLAN Configuration
VLAN is a technology that implements virtual workgroups by dividing the physical
equipment in a LAN into several logical network segments. The IEEE issued the IEEE
802.1q standard in 1999 to normalize the VLAN solution.
The ZXA10 C300 supports 4094 VLANs.
Table 5-1

Table 5-1 VLAN Specifications

VLAN Type
Basic VLAN
Service port VLAN
TLS VLAN
Cross-connection
VLAN
Table of Contents

Configuring the Uplink Port VLAN...............................................................................5-1

Configuring the Service Port VLAN.............................................................................5-2
Configuring the Cross-Connection VLAN....................................................................5-3
5.1 Configuring the Uplink Port VLAN
By configuring the uplink port VLAN, you can classify ports into different network segments
logically to control the communication between ports.
Steps
1. In uplink interface configuration mode, configure the port VLAN.
ZXAN(config)#interface gei_1/21/1
ZXAN(config-if)#switchport vlan 2-100 tag
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the VLAN specifications.
Description
Used to isolate ports.
Used to implement VLAN translation at the ONU level.
Used to add an SVLAN to the packet to implement the Transparent
Service (TLS) whatever the user access mode is, or no matter whether the
upstream packet has a VLAN tag, or whatever the VLAN tag is.
Used to set the special channel for the user port and uplink port. The packets
are forwarded in 1:1 mode according to the VLAN ID.
5-1
ZTE Proprietary and Confidential
LAN