Zte ZXA10 C300 Configuration Manual page 56

ZXA10 C300 Configuration Manual (CLI)
4. In ONU interface mode, configure the service port VLAN.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#service-port 2 vport 2 user-vlan 200 vlan 200
ZXAN(config-if)#exit
By default, the mapping mode between the virtual port and the GEM port is 1:1.
5. (Optional) Enable IGMP globally.
ZXAN(config)#igmp enable
6. Configure the port IGMP parameters.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#igmp fast-leave enable vport 2
ZXAN(config-if)#exit
7. Configure the MVLAN.
ZXAN(config)#igmp mvlan 200
8. (Optional) Configure the MVLAN working mode.
ZXAN(config)#igmp mvlan 200 work-mode proxy
9. Configure the MVLAN multicast group.
ZXAN(config)#igmp mvlan 200 group 224.1.1.1 to 224.1.1.3
10. Configure MVLAN source port.
ZXAN(config)#igmp mvlan 200 source-port gei_1/22/1
11. Configure the MVLAN receive port.
ZXAN(config)#igmp mvlan 200 receive-port gpon-onu_1/5/1:1 vport 2
12. In ONU remote management mode, configure the service channel.
ZXAN(config)#pon-onu-mng gpon-onu_1/5/1:1
ZXAN(gpon-onu-mng)#service multicast gemport 2 cos 5 vlan 200
13. Configure the user port MVLAN.
ZXAN(gpon-onu-mng)#mvlan 200
ZXAN(gpon-onu-mng)#mvlan tag-strip eth_0/2 enable
14. Configure the user port VLAN.
ZXAN(gpon-onu-mng)#vlan port eth_0/2 mode tag vlan 200 pri 5
ZXAN(gpon-onu-mng)#end
15. Save the configuration data.
ZXAN#write
– End of Steps –
SJ-20130520164529-007|2013-06-30 (R1.0)
Note:
2-22
ZTE Proprietary and Confidential