Configuring The Gpon Broadband Service - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
Username:
Password:
Realm:
UDP port:
DSCP/TOS:
Media UDP port:
Media DSCP/TOS:
Message format:
Version:
Maximum retry time:
Maximum retry attempts: 0(s)
Service change delay:
Softswitch vendor:
User TID:
Prefix:
Postfix length:
Postfix start number: 1
RTP TID:
Prefix:
Postfix length:
Postfix start number: 1
Heart beat:
RTP link detect:
Number shortest match:
Digit map long timer:
Digit map short timer:
Digit map start timer:
Heart beat interval:
Rereg timer min:
Rereg timer max:
Regmsg retran timer:
Total retran timer:
– End of Steps –

2.11 Configuring the GPON Broadband Service

After you configure the GPON broadband service, the subscriber can access the Internet.
Prerequisite
l
The GPON ONU has been authenticated.
l
The T-CONT bandwidth profile has been configured.
SJ-20130520164529-007|2013-06-30 (R1.0)
N/A
N/A
N/A
2944
0
2944
0
text long
1
0(s)
0(s)
user
5
rtp
5
service change
disable
disable
20000(ms)
5000(ms)
10000(ms)
60000(ms)
60000(ms)
120000(ms)
2000(ms)
10000(ms)
2-16
ZTE Proprietary and Confidential