Figure 2-2 Configuration Flowchart Of The Gpon Broadband Service - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)

Figure 2-2 Configuration Flowchart of the GPON Broadband Service

Steps
1. In ONU interface mode, configure the T-CONT.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#tcont 1 name T1 profile 10M
2. Configure the GEM port.
ZXAN(config-if)#gemport 1 name gemport1 tcont 1
ZXAN(config-if)#exit
3. In uplink interface configuration mode, configure the uplink port VLAN.
ZXAN(config)#interface gei_1/22/1
ZXAN(config-if)#switchport vlan 100 tag
ZXAN(config-if)#exit
4. In ONU interface mode, configure the service port VLAN.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#service-port 1 vport 1 user-vlan 100 vlan 100
ZXAN(config-if)#exit
By default, the mapping mode between the virtual port and the GEM port is 1:1.
5. In ONU remote management mode, configure the service channel.
ZXAN(config)#pon-onu-mng gpon-onu_1/5/1:1
SJ-20130520164529-007|2013-06-30 (R1.0)
Note:
2-18
ZTE Proprietary and Confidential