Configuration Flow
Figure 16-25
Figure 16-25 Configuration Flowchart of VPLS Redundancy
Steps
l
Configuration on C300-1.
1. Configure the loopback interface.
ZXAN(config)#interface loopback1
ZXAN(config-loopback1)#ip address 1.1.1.1 255.255.255.255
ZXAN(config-loopback1)#exit
2. Configure the VLAN of the uplink interfaces.
ZXAN(config)#interface gei_1/21/1
ZXAN(config-if)#switchport vlan 10 tag
ZXAN(config-if)#exit
ZXAN(config)#interface gei_1/21/2
ZXAN(config-if)#switchport vlan 11 tag
ZXAN(config-if)#exit
SJ-20130520164529-007|2013-06-30 (R1.0)
shows the configuration flowchart of the VPLS redundancy.
Chapter 16 MPLS Service Configuration
16-81
ZTE Proprietary and Confidential