Table 11-2 Configuration Data Of Dhcp Server - Zte ZXA10 C300 Configuration Manual

Table 11-2 Configuration Data of DHCP Server

Item
Global DHCP
IP address pool
DHCP IP address pool
DHCP policy
DHCP server
Steps
1. Enable the global DHCP function.
ZXAN(config)#ip dhcp enable
2. Configure the IP address pool for DHCP clients.
ZXAN(config)#ip pool ippool1
ZXAN(config-ip-pool)#range 10.10.1.3 10.10.1.254 255.255.255.0
ZXAN(config-ip-pool)#exit
3. Apply the IP address pool to the DHCP IP address pool.
ZXAN(config)#ip dhcp pool dhcppool1
ZXAN(config-dhcp-pool)#ip-pool ippool1
4. Configure the lease time of the IP addresses.
ZXAN(config-dhcp-pool)#lease-time infinite
5. Configure the DHCP
ZXAN(config-dhcp-pool)#dns-server 10.10.1.2
6. Configure the default route.
ZXAN(config-dhcp-pool)#default-router 10.10.1.254
ZXAN(config-dhcp-pool)#exit
7. Configure the DHCP policy.
ZXAN(config)#ip dhcp policy dhcppy 1
ZXAN(config-dhcp-policy)#dhcp-pool dhcppool1
ZXAN(config-dhcp-policy)#exit
8. In management interface mode, configure the DHCP mode and policy.
SJ-20130520164529-007|2013-06-30 (R1.0)
status
DNS server.
Chapter 11 DHCP Configuration
Data
enable
l
Name: ippool1
l
Range: 10.10.1.3–10.10.1.254
l
Name: dhcppool1
l
IP pool: ippool1
l
DNS IP address: 10.10.1.2
l
IP address lease period: infinite
l
Default route: 10.10.1.254
l
Name: dhcppy
l
Priority: 1
l
DHCP IP address pool: dhcppool1
l
IP address: 10.10.1.1
l
Mode: server
l
Policy: dhcppy
11-3
ZTE Proprietary and Confidential