Configuring Queue Scheduling - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
2. In Ethernet interface mode, apply the DSCP remarking profile.
ZXAN(config)#interface gei_1/21/1
ZXAN(config-if)#qos dscp dscp-remark test
3. Configure trust DSCP on the interface.
ZXAN(config-if)#qos trust dscp
4. (Optional) Query the QoS configuration on the interface.
ZXAN(config-if)#show qos interface gei_1/21/1
qos dscp dscp-remark TEST
qos trust dscp
5. (Optional) Query the DSCP remarking profile.
ZXAN(config)#show qos dscp-to-dscp-profile test
-----------------------------------------------------------------
profile name
profile detail :
-----------------------------------------------------------------
dscp list
dscp value
-----------------------------------------------------------------
dscp list
dscp value
-----------------------------------------------------------------
dscp list
dscp value
-----------------------------------------------------------------
dscp list
dscp value
profile used by:
gei_1/21/1
– End of Steps –

7.1.5 Configuring Queue Scheduling

Using the profile, you can implement queue scheduling on the Ethernet interface.
Steps
1. In global configuration mode, configure the queue scheduling profile.
ZXAN(config)#qos queue-block-profile test queue0 2 0 queue1 3 0
SJ-20130520164529-007|2013-06-30 (R1.0)
: TEST
0 1 2 3 4 5 6
0 1 2 13 4 5 6
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
7-4
7 8 9 10 11 12 13 14 15
7 8 9 10 11 12 13 14 15
ZTE Proprietary and Confidential