Table 13-1 Pon Protection Configuration Data - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
Context
The ZXA10 C300 supports the following three PON port switchover modes:
l
Force
The service is switched to the specified PON port unconditionally. The service can be
switched from the protection port to the working port (p2w) or from the working port to
the protection port (w2p) forcedly.
l
Alarm-triggered (default)
l
Manual
The service needs to be switched manually. Switchover in p2w or w2p mode is
supported.
The priorities of the three modes in descending order are force, alarm-triggered, and then
manual.
Configuration Data
Table 13-1

Table 13-1 PON Protection Configuration Data

Item
PON protection group
Working PON port
Protection PON port
Protection type
Protection mode
Restoring time
Steps
1. In PON configuration mode, clear the configuration data on the protection PON port.
ZXAN(config)#pon
ZXAN(config-pon)#clear gpon-olt_1/5/2
2. Create a PON protection group.
ZXAN(config-pon)#protection group zte workpon gpon-olt_1/5/1 protectpon gpon-olt_
1/5/2 typeB
3. Configure the attributes of the PON protection group.
ZXAN(config-pon)#protection prop group zte mode revertive wtr 120
4. (Optional) Switch the PON port by forced.
ZXAN(config-pon)#protection switch-command group zte force w2p
5. (Optional) Query the PON protection group.
ZXAN(config-pon)#show protection group information zte
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the PON protection configuration data.
Data
zte
1/5/1
1/5/2
Type B
revertive
120s
13-2
ZTE Proprietary and Confidential