Zte ZXA10 C300 Configuration Manual page 233

7. Configure the LDP target session.
ZXAN(config)#mpls ldp target-session 1.1.1.1
8. Configure the PW class.
ZXAN(config)#pw-class 1and1000pw
ZXAN(config-pw-class)#control-word preferred
ZXAN(config-pw-class)#exit
9. Configure the VC.
ZXAN(config)#pw 1and1000pw
ZXAN(config-pw)#mode dynamic pwe3 fec128
ZXAN(config-pw)#pwtype e1
ZXAN(config-pw)#apply pw-class 1and1000pw
ZXAN(config-pw)#peer 1.1.1.1 router-id 1.1.1.1 vcid 1000
ZXAN(config-pw)#exit
10. Configure the VLL.
ZXAN(config)#vll tdm-vll
ZXAN(config-vll)#service-type tdm
ZXAN(config-vll)#mpls xconnect pw 1and1000pw
ZXAN(config-vll)#exit
11. Configure the CIP.
ZXAN(config)#cip 1
ZXAN(config-cip1)#service-type tdm-relay mpls 1047016 7016 1047015 7015 0015.eb72.
0005 1000
ZXAN(config-cip1)#xconnect tdm-vll
ZXAN(config-cip1)#exit
12. Configure the MAC address.
ZXAN(config)#mac 0015.eb72.0003 15
13. Save the configuration data.
l
Configuration on F829–2.
1. Configure the CES MAC address.
ZXAN(config)#ces
ZXAN(config-ces)# mac-add 0015.eb72.0005
2. Configure the TDM profile.
ZXAN(config-ces)# tdm-profile f829 reorder en rtpHder en jtrBfr 4000 TSMode dif 6
3. Configure the TDM service.
ZXAN(config-ces)# tdm-service type e1satop clock-source adaptive primary-clock
1 secondary-clock 3 0/2
4. Configure the PW.
ZXAN(config-ces)# pw pw_0/2/1
ZXAN(config-ces-pw)# tdm-relation tdm_0/2/1 frame 1 channellist 1-12 tdm-profile
-name f829
SJ-20130520164529-007|2013-06-30 (R1.0)
Chapter 16 MPLS Service Configuration
16-77
ZTE Proprietary and Confidential