Figure 2-3 Configuration Flowchart Of The Gpon Multicast Service - Zte ZXA10 C300 Configuration Manual

Figure 2-3 Configuration Flowchart of the GPON Multicast Service

Steps
1. In ONU interface mode, configure the T-CONT.
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#tcont 2 name T2 profile 5M
2. Configure the GEM port.
ZXAN(config-if)#gemport 2 name gemport2 tcont 2
ZXAN(config-if)#exit
3. In uplink interface configuration mode, configure the uplink port VLAN.
ZXAN(config)#interface gei_1/22/1
ZXAN(config-if)#switchport vlan 200 tag
ZXAN(config-if)#exit
SJ-20130520164529-007|2013-06-30 (R1.0)
Chapter 2 GPON/XG-PON Service Configuration
2-21
ZTE Proprietary and Confidential