Table 2-2 Configuration Data For Gpon Onu Authentication; Table 2-3 Descriptions Of Onu Phase States - Zte ZXA10 C300 Configuration Manual

Using the ONU SN for authentication
l Password authentication
Using the ONU password for authentication
l
SN + password authentication
Using the ONU SN and password for authentication
Configuration Data
Table 2-2 lists the configuration data for GPON ONU authentication.

Table 2-2 Configuration Data for GPON ONU Authentication

Item
ONU ID
ONU type
SN
Steps
1. Query the unauthenticated ONU.
ZXAN(config)#show gpon onu uncfg gpon-olt_1/5/1
OnuIndex
---------------------------------------------------------------------
gpon-onu_1/5/1:1
2. In Optical Line Terminal (OLT) interface mode, authenticate the ONU.
ZXAN(config)#interface gpon-olt_1/5/1
ZXAN(config-if)#onu 1 type ZTEG-F620 sn ZTEG00000002
[Successful]
ZXAN(config-if)#exit
3. (Optional) Query the authenticated ONU.
ZXAN(config)#show gpon onu state gpon-olt_1/5/1
OnuIndex
---------------------------------------------------------------------------
gpon-onu_1/5/1:1
Table 2-3

Table 2-3 Descriptions of ONU Phase States

State
offline
logging
syncMib
SJ-20130520164529-007|2013-06-30 (R1.0)
Sn
ZTEG00000002
Admin State
enable
describes the ONU phase states.
Description
The OLT does not find the ONU because the ONU is offline.
The OLT has found the ONU and is measuring the distance.
The OLT has measured the distance to the ONU and is synchronizing
data.
Chapter 2 GPON/XG-PON Service Configuration
Data
1
ZTEG-F620
ZTEG00000002
State
unknown
Omcc State O7 State
enable operation
2-5
ZTE Proprietary and Confidential
Phase State
working