Rep 7.4 Roll Feed Drive Rolls - Xerox 8830 Service Manual

REP 7.4 Roll Feed Drive Rolls

Parts List on PL 7.1
WARNING
Switch off the Main Power Switch.
Disconnect the Power Cord.
NOTE: All three Roll Feed Drive Roll assemblies
are removed the same way.
Remove the
E-ring
REP 7.4
Removal
1. Remove the appropriate Media Supply
Drawer (REP 7.1).
2. Remove the Feed Clutch (REP 7.5).
3. Remove the Toner Waste Container.
4. (Figure 1): Remove the Roll Feed Drive
Rolls.
Figure 1. Removing the Roll Feed Drive Rolls
1/98
4-8
Remove the
bearing
Remove the
E-ring
5
Remove the
Drive Rolls
R01859
8830