Xerox 8830 Service Manual page 140

NOTE: To ensure that the Toner Cartridge is
correctly engaged in the Drive Plate, rotate the
cartridge in both directions.
2. (Figure 4): Reinstall the Toner Cartridge.
4
Slide the Top
Shield closed
Remove the tape
REP 9.5
3. If new Developer Material has been installed,
perform the Toner Sensor Calibration Code
[09216],
Partially rotate the
Toner Cartridge in
both directions to
ensure that the
cartridge is locked in
the Drive Hub
Figure 4. Reinstalling the Toner Cartridge
Pull the plunger and
reinstall the Toner
Cartridge
1/98
4-56
1599B
8830