Xerox 8830 Service Manual page 166

16. (Figure 10): Continue to pull the Video Cable
through the hole after releasing it from the cable
guides.
17. Lift out the Image Module Assembly / Pivot Bar
combination.
Replacement
1. Reverse the removal steps for replacement of the
Image Module Assembly.
2. Perform Electrostatic Series (ADJ 9.2).
REP 9.20
Unfasten the Video
Cable
4
Remove the
spacer
Remove the bolt
Figure 10. Preparing to Remove the Image Module Assembly (View looking at the
Rear from the Right Side)
1/98
4-82
1
Disconnect the connectors and
remove the Charge Scorotron
Harness
R001K
8830