Xerox 8830 Service Manual page 268

CAUTION
Note the location of the individual module
connectors in the housing before removing
them. This will ensure that they are
reinstalled correctly after the repair to the
terminals is complete. Failure to position the
individual connectors correctly will cause the
printer to malfunction, causing damage.
CAUTION
Use caution when forcing the housing body
away from the module connector. Too much
force could cause damage to the housing
body.
Molex Connector Repair Procedure
2. (Figure 2): Remove the individual module
connectors from the housing.
Figure 2. Removing the Module Connectors
1/98
6-34
1
Insert the Extractor Tool
between the housing and the
individual Module Connectors
Force the housing body away
from the Module Connector
while performing Step 3
8830