Xerox 8830 Service Manual page 102

5. (Figure 3): Remove the Media Transport
Assembly.
Remove the Media
Transport Assembly
Move the Media
Transport pin out of
the locating hole and
onto the ramp
REP 8.1
1
Disconnect the Latch
Arms from the Transport
(Both sides)
Figure 3. Removing the Media Transport Assembly
5
Ensure that the
Moisture Collection
Tube is out of the hole
in the frame
1/98
4-18
Loosen the screw and
rotate the bracket
downward
Pull the pin and hold it
out of the Transport
4
Ensure that the pin is free of
the bushing and move the
Right Side of the Media
Transport toward you
R2447B
8830