Restore Factory Nvr Values - Xerox 8830 Service Manual

Restore Factory NVR Values

Selecting the Restore NVR Default Values button restores the values
stored In the NVR to the factory default values.
contents of NVR may become corrupted. Restoring the factory default
values may restore normal operation.
7356 Scanner
When the Restore NVR Defaults button is selected, the following screen
is displayed:
Occasionally, the
Click OK to restore the factory default values.
The Scanner resets. When the Scanner has completed the warm-up
sequence, restore the operating values by performing the following
adjustments:
1. ADJ 4.1.5 Camera Normalization
2. ADJ 4.1.4 Left to Right Stitch
3. ADJ 4.1.3 Front to Back Stitch
4. ADJ 4.1.1 Calibrate Motor Speed
5. ADJ 4.1.2 Calibrate Document Registration.
Refer to Section 4 of this service manual.
4/97
6-19
Diagnostics