Xerox 8830 Service Manual page 19

Status Code Entry Chart (cont.)
Status
Code
E4-12 Sheet feed sensor error
The sheet feed sensor was detected to be
actuated when the machine powered up.
This requires the media exit area to be
opened, and to be removed.
E4-13 Stripper finger Jam switch error
The stripper finger jam switch was actuated
at power on.
E4-14 Media buckle sensor error
The media buckle sensor was detected to be
actuated when the machine powered up.
This requires the media exit area to be
opened, and the media to be removed.
E5-03 Top cover interlock switch error
The top cover was opened during print.
E5-04 Cutter cover interlock switch error
The cutter was opened during print.
E5-05 Feed shelf interlock switch error
The sheet feed shelf was opened during
print.
E5-06
Front door Interlock switch error
The front door was opened during print.
8830
Description
Sheet feed sensor (A21Q2)
Main PWB (A3)
Stripper finger jam switch (A23S1)
Main PWB (A3)
Media buckle sensor A21Q5)
Main PWB (A3)
Fabric Guide Position
Top cover interlock switch (S26)
Driver PWB (A2)
Cutter cover interlock switch (S1)
Driver PWB (A2)
Feed shelf interlock switch (S29)
Driver PWB (A2)
Front door interlock switch (S21)
Driver PWB (A2)
Components RAP
NO
NO
NO
NO
NO
NO
NO
1/98
1-11
Comp
BSD Ref PL
Code Ref
[0801]
8.1 PL 8.4
PL 1.3
[1005] 10.3
PL 10.4
PL 1.3
[0802] 4.1
PL 8.4
PL 1.3
1.3
[0911]
PL 14.5
PL 1.1
[0702] 1.3
PL 7.6
PL 1.1
[0910]
1.2 PL 14.3
PL 1.1
[0101]
1.3 PL 14.3
PL 1.1
Status Code Entry Chart