Xerox 8830 Service Manual page 267

Molex Connector Repair
Procedure
Purpose
The purpose of this procedure is to show the
approved method of repair or replacement of
the wire terminals in either the Pin Housing
Connectors or the Socket Housing Connectors
without damaging them.
CAUTION
The Molex connectors will break easily. Use
only approved tools and procedures when
extracting modules or terminals, or resetting
the terminal locking tabs.
Items Required
600T1825 Extraction Tool
Procedure
1. (Figure 1): Familiarize yourself with the
Molex Extraction Tool components.
8830
This hook is used to reform
the Locking Tab on the pin
before inserting the pin into
the connector
This protruding tab is used to
This protruding tab is used to
release the Locking Tabs on release the locking tabs on the pins
the pins while the individual when the individual module
module connectors remain In connectors are removed from the
the housing
housing
Figure 1. Molex Extraction Tool Components
1/98
6-33
Flat tabs
Extender
These flat tabs and extender are
used to remove the individual
module connectors from within
the housing
Molex Connector Repair Procedure
01984