Xerox 8830 Service Manual page 245

Code
Description
[1032] Specify Web Oil Rate.
This is used to adjust the
web oil rate from 50% to
200%. (A 100% setting Is
nominal.) This setting
directly impacts the life of
the Oil Web. 50% means
that 1/2 as much web is
used.
[1033] Advance Oil Web.
Used to tension the web
correctly when the oil
assembly is removed and
reinstalled.
[1034] Estimate Oiler Web Life.
Displays the remaining
web life in print feet or
meters
[1035] Disable LL-07 Oiler Fault
Detection
Disable LL-12 Fault
[1036]
Detection (Drum Stall)
8830
Code Description
Value
[1060] Fuser Temperature bond
media adjustment. Allows
the adjustment of the
Fuser Run Temperature:
300* F(149'C)with36
inch wide bond media.
Refer to ADJ 10.1 Fuser
Temperature.
[1062] Fuser Temperature
vellum media adjustment:
294 F (146*C). Refer to
ADJ 10.1 Fuser
Temperature.
[1063] Fuser Temperature film
media adjustment:
300 F (149 °C). Refer to
ADJ 10.1 Fuser
Temperature.
[1101] Folder Status
[1401]
Loopback Test for
Remote Access Interface
Loopback
[1402]
Controller
Status
[1403]
Loopback Test for
Finisher Port
Value
Test for
Command
1/98
6-9
Diagnostics