Xerox 8830 Service Manual page 16

Status Code Entry Chart (cont.)
Status
Code
C3-06
Roll 2 position sensor error
Media was not detected at the Roll 2 position
sensor when feeding from roll 3.
C3-07
Roll 1 position sensor error
Media was not detected at the Roll 1 position
sensor when feeding from Roll 3.
C1-09 Firmware error
C2-09
C3-09
This is a firmware problem. Press power off
(0) then power on (1). If problem persists,
replace the firmware.
C1-19
This Is a Firmware problem
C2-19
C3-19
This is a firmware problem. Press power off
(0) then power on (1). If problem persists,
replace the firmware.
C1-29
This is a Firmware problem.
C2-29
C3-29
This is a firmware problem. Press power off
(0) then power on (1). If problem persists,
replace the firmware.
C1-39
This is a Firmware problem.
C2-39
C3-39
This is a firmware problem. Press power off
(0) then power on (1). If problem persists,
replace the firmware.
Status Code Entry Chart
Description
Roll 2 position sensor (Q2)
Main PWB (A3)
Roil 1 position sensor (Q1)
Main PWB (A3)
Components RAP
NO
NO
NO
NO
NO
NO
1/98
1-8
Comp BSD PL
Ref Ref
Code
7.3 PL 7.1
[0708]
PL 1.3
PL 7.1
[0707] 7.2
PL 1.3
8830