Resetting NVRAM
Resetting NVRAM returns all the image processor's NVRAM-stored
parameters to their factory defaults except the print counts and the Adobe
firmware serial number. You can reset both the PostScript and engine NVRAM
the PostScript Menu or the Service Diagnostics Menu.
PostScript NVRAM Resets
Restore Factory Settings (color)
You can reset settings for density and color balance to the factory-default
values.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Improve Print-Quality? and press OK.
3.
Highlight Calibrate Colors Menu and press OK.
4.
Highlight Restore Factory Settings? and press OK.
5.
Highlight Restore Factory Settings NOW and press the OK to reset the
color settings to factory defaults.
Restore Previous Settings (color)
You can return the color settings to the ones that existed before you saved the
last color balance adjustments.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Improve Print-Quality? and press OK.
3.
Highlight Calibrate Colors Menu and press OK.
4.
Highlight Restore Factory Settings? and press OK.
5.
Highlight Restore Previous Settings and press OK to restore the previous
color settings.
Phaser 7700 Color Laser Printer Service Manual
6-145