Driver Setting Screen - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

8
CC IE Control UTILITY
8.4.6

Driver setting screen

This screen is displayed by clicking the
screen.
Section 8.4.1 Parameter setting screen
It is used to set the driver WDT monitoring time, time-out time and link refresh cycle.
Item
Driver WDT Monitoring Time
Use driver WDT
function
Current value
Setting value
Transient timeout
monitoring time
Current value
Setting value
Link refresh cycle
Current value
Setting value
End
Cancel
Description
Displays the current value of the driver WDT
monitoring time and the setting value to be
entered.
Select when using the driver WDT function.
Displays the current value set for the driver WDT
monitoring time.
Set the driver WDT monitoring time.
Displays the current value of the transient time-
out monitoring time and the setting value to be
entered.
Displays the current value set for the transient
time-out monitoring time.
Set the transient time-out monitoring time.
Displays the current value of the link refresh cycle
and the setting value to be entered.
Displays the current value set for the link refresh
*1
cycle.
*2
Set the link refresh cycle.
Reflects the settings, and closes the "Driver
setting" screen.
Without reflecting the settings, closes the "Driver
setting" screen.
*1: The current value of the operating link refresh time can be checked on the "Board detail
information" screen.
*2: The link refresh cycle cannot be set to 5ms or lower when the multiple boards are installed to a
single-core CPU.
button on the "Parameter setting"
Driver setting
Default
—
Unchecked
No setting
No setting
—
15
15
—
15
15
—
—
8.4 Setting Screen
8.4.6 Driver setting screen
1
2
3
4
Setting range
—
5
Checked
Unchecked
1 to 32767
1 to 32767
6
—
1 to 360
1 to 360
7
—
1 to 1000
1 to 1000
—
8
—
8
- 21