Routing Parameter Setting Screen - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

8
CC IE Control UTILITY
8.4.4

Routing parameter setting screen

This screen is displayed by clicking the
setting" screen.
Section 8.4.1 Parameter setting screen
It is used to set the target network number, relay network number, and relay station
number.
POINT
Item
Target network No.
Relay network No.
Relay station No.
Maximum size of transient
transmission when relaying
*1
other networks.
Clear
Check
End
Cancel
(1) The routing parameters are commonly used with channel numbers from 151
to 154. They cannot be set for each channel number.
(2) Up to 64 routine parameters can be set.
Description
Set the target network numbers. These numbers
cannot be overlapped.
Set the first relay network number in the path to
the transfer target.
Set the first relay station in the path to the
transfer target.
Set the maximum transmission size (960 words/
480 words) for each channel number, when
executing the transient transmission from the
user program by relaying other networks.
Clears the routing parameter settings.
Checks the routing parameter settings.
Reflects the settings, and closes the "Routing
parameter setting" screen.
Without reflecting the settings, closes the
"Routing parameter setting" screen.
*1: The setting of 960 words is applicable only when the relay station and target station for the
transient transmission that relays other networks, are the network modules compatible with the
MELSEC-Q series.
button on the "Parameter
Routing parameter
Default
No setting
No setting
No setting
480 words
—
—
—
—
8.4 Setting Screen
8.4.4 Routing parameter setting screen
1
2
3
4
5
Setting range
6
1 to 239
1 to 239
1 to 120
960 words 7
480 words
—
—
—
8
—
8
- 19