Equal Assignment Settings - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

6
PARAMETER SETTINGS
6.4

Equal Assignment Settings

This function is used to assign devices automatically in the network range.
The equal assignment settings are set on the "Equal assignment" screen in the CC IE
Control utility.
Section 8.4.3 Equal assignment screen
The following shows the two types of equal assignment.
Assignment
method
Equal assignment
Identical point
assignment
6
- 17 6.4 Equal Assignment Settings
• Equal assignment of LB/LW
The specified link device range can be equally assigned to the send ranges of the
relevant stations.
• Equal assignment of LX/LY
The specified link device range can be equally assigned to the I/O ranges between
the I/O master station and relevant stations.
• Identical point assignment of LB/LW
Identical points are assigned to the LB/LW send ranges of each station.
• Identical point assignment of LX/LY
Identical points are assigned to the I/O ranges between the I/O master station and
other stations.
Description