Actions For Wdt Error; Board Wdt Error; Driver Wdt Error - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

14
TROUBLESHOOTING

14.7 Actions for WDT Error

14.7.1 Board WDT error

When the board WDT error occurred, check the following items.
Is the board installed properly?
Does the board operate on other personal
computer?
If any of the above actions do not solve the error, refer to Section 14.9.

14.7.2 Driver WDT error

When the driver WDT error occurred, check the following items.
Has the error occurred due to the system
overload temporarily?
Is the same error occurred repeatedly?
(Is the system overloaded constantly?)
If any of the above actions do not solve the error, refer to Section 14.9.
Item
Item
*1
*1 A driver WDT error may occur when the system is overloaded temporarily due to the following
factors.
®
• Windows start processing at the personal computer startup
• Operation of a device driver such as a graphic board
• Operation of other software applications
Corrective action
• Check the board installation status.
• After formatting the HD, install the operating
system again.
• Repair or replace the personal computer.
Corrective action
• Reset the board. (Section 8.3.3)
• Restart the personal computer.
• Remove the factor of system overload.
• Disable the driver WDT function or increase the
driver WDT monitoring time. (Section 8.4.6)
14.7 Actions for WDT Error
14.7.1 Board WDT error
9
10
11
12
13
14
A
I
14
- 27