Optical Fiber Cable Specifications; Buffer Memory - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

3
SPECIFICATIONS
Item
Q80BD-J71GP21-SX
Number of boards that
can be installed
Occupied slots
PCI bus slot or PCI-X slot
Installation slot
(Half size)
Voltage
Current
Connector
Applicable
cable size
External
Allowable
power
momentary
*2
power
supply
failure time
Noise
durability
Internal current
consumption
Weight
3.3

Optical Fiber Cable Specifications

For optical fiber cables, refer to the following manual.
CC-Link IE Controller Network Reference Manual
3.4

Buffer Memory

For buffer memory, refer to the following manual.
 CC-Link IE Controller Network Reference Manual
3
- 3 3.3 Optical Fiber Cable Specifications
Q80BD-J71GP21S-SX
DC20.4 to DC31.2V
0.50 to 1.25mm
No external power
supply function
Noise voltage 500Vp-p
Noise width 1 s
(by the noise simulator
with noise frequency
1.10A (5VDC)
0.12kg
*1: This indicates the number of CC-Link IE Controller Network boards that can be installed to a
personal computer, not including any other boards such as MELSECNET/H boards.
Note that it cannot exceed the number of physical PCI slots of the personal computer.
*2: Use the power complies with CLASS2.
Specification
Q81BD-J71GP21-SX
*1
Up to 4
1 slot
PCI Express
(Half size)
0.27A
Connector set
(accessory)
2
[AWG20-16]
No external power
1ms (level PS1) supply function
25 to 60Hz)
0.14kg
Q81BD-J71GP21S-SX
®
x1, x2, x4, x8, x16 slot
DC20.4 to DC31.2V
0.27A
Connector set
(accessory)
0.50 to 1.25mm
[AWG20-16]
1ms (level PS1)
Noise voltage 500Vp-p
Noise width 1 s
(by the noise simulator
with noise frequency
25 to 60Hz)
2.07A (3.3VDC)
0.13kg 0.14kg
2