Setting Channel Numbers - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

5
PROCEDURES AND SETTINGS BEFORE OPERATION
WARNING
CAUTION
5.3.4

Setting Channel Numbers

Channel number is set per board, and used to identify the board. The channel number can
be set within the range of 151 to 154.
Channel numbers being set are used to specify the target boards in setting parameters
and performing the MELSEC data link library function.
(1) Setting method
Channel No. is assigned to the CC-Link IE Controller network board installed in a
personal computer in order of PCI slot number automatically. The desired channel No.
can be assigned on the "Parameter setting" screen (
Control utility. (
Shut off the external power supply for the system in all phases before
installing the board to or removing it from the personal computer.
Failure to do so may result in electric shock or cause the board to fail or
malfunction.
Fix the board by tighten the board-fixing screws.
Tighten the board-fixing screws within the specified torque range.
Undertightening may cause drop of the component, short circuit, or
malfunction.
Overtightening may damage the screw and/or board, resulting in drop, short
circuit, or malfunction.
For the tightening torque of the board-fixing screws, refer to the manual
supplied with the personal computer.
Before handling the board, touch a conducting object such as a grounded
metal to discharge the static electricity from the human body. Failure to do
so may cause the board to fail or malfunction.
Install the board to a personal computer which is compliant with PCI standard
®
or PCI Express standard (Section 2.5 Operating Environment). Failure
to do so may cause a failure or malfunction.
Securely insert the board into the PCI slot following the board installation
instruction of the personal computer.
Incorrect insertion of the board may lead to a malfunction, failure or drop of
the board.
When installing the board, take care not to get injured by an implemented
component or a surrounding member.

Section 6.1

)
5.3 Installation
5.3.4 Setting Channel Numbers
) of CC IE
Section 8.4.1
5
- 10
1
2
3
4
5
6
7
8