Mitsubishi Electric Q80BD-J71GP21-SX User Manual page 73

5
PROCEDURES AND SETTINGS BEFORE OPERATION
(6) Checking the test result
The result is displayed on Test result field of the "Board detail information" screen.
If the test completes abnormally, check the error cause on the "CC-Link IE Controller
Network diagnostics result" screen of the CC IE Control utility, process the error with
following the troubleshooting.
Section 8.5.1 CC-Link IE Controller Network diagnostics result screen
Then, reexecute the circuit test.
<Normal completion> <Abnormal completion>
5.5 Test
5.5.4 Circuit test
1
2
3
4
5
6
7
8
5
- 24