Installation; Handling Precautions - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

5
PROCEDURES AND SETTINGS BEFORE OPERATION
5.3

Installation

This section explains precautions for handling and installation environment of the CC-Link
IE Controller Network board.
5.3.1

Handling precautions

The following explains precautions for handling the CC-Link IE Controller Network board.
WARNING
CAUTION
Do not touch any connectors while power is on. Doing so may cause
electric shock or malfunction.
Do not directly touch any conductive parts and electronic components of the
board. Doing so may cause malfunction or failure of the board.
Do not disassemble or modify the board. Doing so may cause failure,
malfunction, injury, or a fire.
Before handling the board, touch a conducting object such as a grounded
metal to discharge the static electricity from the human body. Failure to do
so may cause the board to fail or malfunction.
Handle the board in a place where static electricity will not be generated.
Failure to do so may cause a failure or malfunction.
The board is included in an antistatic envelope.
When storing or transporting it, be sure to put it in the antistatic envelope.
Failure to do so may cause a failure or malfunction.
Do not drop or apply a strong impact to the board.
Doing so may cause a failure or malfunction.
Prevent foreign matter such as dust or wire chips from entering the personal
computer. Such foreign matter may cause a fire, failure, or malfunction.
When disposing of this product, treat it as industrial waste.
5.3 Installation
5.3.1 Handling precautions
1
2
3
4
5
6
7
8
5
- 8