Mitsubishi Electric Q80BD-J71GP21-SX User Manual page 79

6
PARAMETER SETTINGS
6.1 Parameter Settings (Board Information Settings)
This function is used to set a channel number, network type, and other settings of the CC-
Link IE Controller Network board to be used.
The parameter settings are set on the "Parameter setting" screen in the CC IE Control
utility.
Section 8.4.1 Parameter setting screen
(1) Target board specification
Select a number of CC-Link IE Controller Network boards to be installed in the
personal computer.
In the above screen, two CC-Link IE Controller Network boards are installed.
(2) Board
Select the CC-Link IE Controller Network board whose parameters to be set.
In the above screen, the first CC-Link IE Controller Network board is selected.
(3) Channel No.
Select a channel number to be assigned to the CC-Link IE Controller Network board
whose parameter is being set.
The channel numbers assigned to each CC-Link IE Controller Network board can be
checked on the board list screen (start screen).
Section 8.3.1 Board list screen
1) Valid setting range
151 to 154
6.1 Parameter Settings (Board Information Settings)
1
2
3
4
5
6
7
8
6
- 2