Installation Environment; Board Installation - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

5
PROCEDURES AND SETTINGS BEFORE OPERATION
5.3.2

Installation environment

For installation of the personal computer in which the CC-Link IE Controller Network board
is installed, refer to the manual for the personal computer.
CAUTION
5.3.3

Board installation

The following flowchart shows the board installation procedure.
5
- 9 5.3 Installation
5.3.2 Installation environment
Use the board in an environment that meets the general specifications in
this manual.
Failure to do so may result in electric shock, fire, malfunction, or damage to
or deterioration of the product.
Always ground the personal computer to the protective ground conductor.
Failure to do so may cause a malfunction.
Power OFF
Power OFF the personal computer.
Install the board
Install the board to a slot on a personal computer.
Fix the board
Fix the board to a slot on the personal computer using the board-fixing
screws.
Wire the external power supply
For the CC-Link IE Controller Network board with external power supply
function, wire the external power supply cable.
Power ON
Power ON the personal computer.
Start
End
Section 5.4.2