Mitsubishi Electric Q80BD-J71GP21-SX User Manual page 80

Network melsec series/cc-link ie controller
Table of Contents

Advertisement

6
PARAMETER SETTINGS
6
- 3
6.1 Parameter Settings (Board Information Settings)
<Assigning channel numbers to the CC-Link IE Controller Network boards>
The followings are the cases for assigning channel numbers to the CC-Link IE
Controller Network boards.
(a) When the boards are activated for the first time after the software package is
installed.
The channel numbers 151 to 154 are automatically assigned in the order of PCI
slot number to the CC-Link IE Controller Network boards installed to the personal
computer.
(b) When a channel number is changed on the "Parameter setting" screen of the CC
IE Control utility.
The channel numbers 151 to 154 can be assigned on the "Parameter setting"
screen of the CC IE Control utility (Section 8.4.1). (Note that the same
channel number cannot be assigned to the multiple boards.)
The set channel number becomes valid after completing the setting.
(c) When an additional CC-Link IE Controller Network board is installed.
The unused channel number within 151 to 154 is automatically assigned in the
order of PCI slot number to the additional CC-Link IE Controller Network board
installed to the personal computer.
<Assigning board numbers in the CC IE Control utility>
Board 1 to 4 displayed on the start screen of the CC IE Control utility (Section
8.3.1) are the numbers assigned to the boards in the CC IE Control utility.
The positions of actually installed boards can be checked by the LED display on the
"Channel No. confirm" screen (Section 8.3.2).
The numbers 1 to 4 are assigned to the boards in the order of the channel numbers
151 to 154 which are set at the start up of the personal computer.
In order to change a channel number corresponding to Board 1 to 4, change the
channel number on the "Parameter setting" screen (Section 8.4.1), and restart
the personal computer.
The following shows the example of board assignment when two boards are installed.
(a) Initial status
The channel numbers are
automatically assigned in
the order of PCI slot
number.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q80bd-j71gp21s-sxQ81bd-j71gp21-sxQ81bd-j71gp21s-sx

Table of Contents