Table of Contents
Advertisement
7
INSTALLING AND UNINSTALLING SOFTWARE PACKAGES
CHAPTER 7 INSTALLING AND UNINSTALLING
This chapter explains about installing and uninstalling the software packages, and icons to
be registered.
7.1
Installation and Uninstallation Precautions
The following are the precautions when installing and uninstalling the software package.
SOFTWARE PACKAGES
• Log on as a user having administrator authority.
• Make sure to close other applications running on Windows
software such as antivirus software) before installation and uninstallation.
• The installer may not work normally because the update program of operating
system or other companies' software such as Windows
update may start automatically. Please install the driver after changing the setting
of the update program not to start automatically.
• Check if the display settings on the [Device Manager] or other relevant functions
are correct, and install an appropriate display driver.
Or update the Windows
• The language switching function of the operation system set by "Regional and
Language Options" on the Control Panel screen is not supported. The installation
or uninstallation may not work normally if the language setting is changed.
• When using Windows 10, Windows 8.1, Windows Server 2012 R2, Windows 8, or
Windows Server 2012, .NET Framework 3.5 is required.
Enable the .NET Framework 3.5 (including .NET 2.0 or 3.0) in "Turn Windows
features on or off" on the control panel.
• A network drive cannot be specified as the installation destination.
• When the parameters have been set with the utility installed, the parameters are
initialized at installation. Save the parameters with the save file function before
installing the utility.
Note that the board numbers and channel numbers which have been set may be
changed after installation.
In this case, set the board numbers and channel numbers again.
For changing the board number, restart the personal computer after changing the
channel number in "Channel No." on the "Parameter setting" screen.
For assigning the board numbers and channel numbers, refer to the following
section.
Section 6.1 Parameter Settings (Board Information Settings)(<Assigning
channel numbers to the CC-Link IE Controller Network boards>, <Assigning
board numbers in the CC IE Control utility>)
• When the software package has been installed in the environment that the
creation of 8.3 filename is disabled, the software package may not be uninstalled.
Enable the creation of 8.3 filename before installing the software package. For
the method on how to check and change the status of 8.3 filename creation to
enable/disable, refer to the website of Microsoft Corporation.
• When using SW1DNC-MNETG-B Version 1.19V or later, apply Service Pack1
and Security Update for Windows(KB3033929 or KB31255749) in Windows
and Windows Server
®
operating system.
®
2008 R2.
7.1 Installation and Uninstallation Precautions
®
(including resident
®
Update and Java
®
7
7
- 1
1
2
3
4
5
6
7
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
