Error Messages Displayed On The Diagnostics Screen - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

13
ERROR CODES

13.1.3 Error messages displayed on the diagnostics screen

(1) CC-Link IE Controller Network diagnostics result screen
Error message
Retrieving window creation failed. Network diagnostics will
now end.
No CC-Link IE Controller Network board in connecting
station. Diagnostics will now end.
Network information screen creation failed. Network
diagnostics will now end.
Creation of network information display failed. Network
diagnostics will now end.
Entered station No. is reserved station.
Entered station No. does not exist on network.
Entered Sta. No. is disconnected station.
Enter value within the range from 1 to 120.
Board is not Online mode. Please set Online mode.
Network parameters are not set correctly.
After setting network parameters, please execute again.
13
- 7 13.1 List of Error Messages in CC IE Control Utility
13.1.3 Error messages displayed on the diagnostics screen
Corrective action
• Restart the CC IE Control utility.
• The installation of SW1DNC-MNETG-B may be failed.
Reinstall SW1DNC-MNETG-B.
• Restart the CC IE Control utility.
• The installation of SW1DNC-MNETG-B may be failed.
Reinstall SW1DNC-MNETG-B.
• Restart the CC IE Control utility.
• The installation of SW1DNC-MNETG-B may be failed.
Reinstall SW1DNC-MNETG-B.
• Restart the CC IE Control utility.
• The installation of SW1DNC-MNETG-B may be failed.
Reinstall SW1DNC-MNETG-B.
Enter the station number other than the reserved station
number.
Enter the station number exists on the network.
Enter the station number other than the disconnected station
number.
Enter the value within the range of 1 to 120.
Set the board to Online mode.
Set the network parameters correctly.