Event Setting Screen - Mitsubishi Electric Q80BD-J71GP21-SX User Manual

8
CC IE Control UTILITY
8.4.7

Event setting screen

This screen is displayed by clicking the
screen.
Section 8.4.1 Parameter setting screen
This function is used to set the conditions for monitoring link device changes using the CC-
Link IE Controller Network board to notify events to the user program.
Item
Select the method for entering word device
Input format
setting values.
Device code Set the device name.
Device No. Set a device number.
Set points from the device number.
*1
Can be set only when a device code is a bit
Device size
device.
*2 *3
Set the detection method.
Detection method
*3
Set the event condition.
Event condition
Set a word device setting value.
Word device setting
Can be set only when a device code is a
*2
value
word device.
Event No. Set an event number.
Batch-deletes the event settings
Clear
Event setting
Description
button on the "Parameter setting"
Default Setting range
DEC
DEC
HEX
— LB, LX, SB, LW, SW
LB: 0000 to 7FFF
LW: 00000 to 1FFFF
— LX: 0000 to 1FFF
SB: 0000 to 01FF
SW: 0000 to 01FF
— 1 to 64
Edge detect
—
Level detect
Bit device:
ON, OFF
—
Word device:
Equal, Unequal, Change
— 0 to 65535
— 1 to 64
— —
8.4 Setting Screen
8.4.7 Event setting screen
1
2
3
4
5
6
7
8
8
- 23