Installing And Uninstalling Software Package; Installation And Uninstallation Precautions - Mitsubishi Electric SW0DNC-MNETH-B User Manual

8 INSTALLING AND UNINSTALLING SOFTWARE PACKAGE

8 INSTALLING AND UNINSTALLING SOFTWARE PACKAGE
The methods for installing and uninstalling the software package are explained.

8.1 Installation and Uninstallation Precautions

The following are the precautions when installing and uninstalling the software
package.
 Log on as a user having administrator authority.
 Make sure to close other applications running on Windows (including resident
 The installer may not work normally because the update program of operating
 Check if the display settings on the [Device Manager] or other relevant functions are
 The language switching function of the operation system set by "Regional and
 Default settings are set to the channel numbers and the parameters at the installation.
 When using Windows 10, Windows 8.1, Windows Server 2012 R2, Windows 8, or
 When the software package has been installed in the environment that the creation
 A network drive cannot be specified as the installation destination.
 When using SW0DNC-MNETH-B version 30G or later, apply Service Pack1 and
 When installing the software package, enable "User Account Control: Detect
8 - 1
software such as antivirus software) before installation and uninstallation.
system or other companies' software such as Windows Update and Java update may
start automatically. Please install the driver after changing the setting of the update
program not to start automatically.
correct, and install an appropriate display driver.
Or update the Windows operating system.
Language Options" on the Control Panel screen is not supported. The installation or
uninstallation may not work normally if the language setting is changed.
Therefore, when a reinstallation of the software package is required, record the
existing settings in advance, and reset the settings after the reinstallation. (Refer to
Chapter 7)
Windows Server 2012, .NET Framework 3.5 is required. Enable the .NET Framework
3.5 (including .NET 2.0 or 3.0) in "Turn Windows features on or off" on the control
panel.
of 8.3 filename is disabled, the software package may not be uninstalled. Enable
the creation of 8.3 filename before installing the software package.
For the method on how to check and change the status of 8.3 filename creation to
enable/disable, refer to the website of Microsoft Corporation.
Security Update for Windows(KB3033929) in Windows 7 and Windows Server 2008
R2.
application installations and prompt for elevation" in 'Local Security Policy' in
Windows.
MELSEC
8
8 - 1