Chapter 6 Installing And Uninstalling Software Packages; Installation And Uninstallation Precautions; Installation; Installation Procedure - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

6
INSTALLING AND UNINSTALLING SOFTWARE
PACKAGES
This chapter explains the software package installation and uninstallation.
6.1

Installation and Uninstallation Precautions

The following are the precautions when installing and uninstalling the software package.
• Log on as a user with administrator authority.
• Make sure to close other applications running on Windows (including resident software such as antivirus software) before
installation and uninstallation.
• The installer may not work normally because the update program of operating system or other companies' software such as
Windows Update and Java
update program not to start automatically.
• Check if the display settings on the [Device Manager] of Windows are correct, then install an appropriate display driver, or
update the Windows.
• The language switching function of the operating system set by "Regional and Language Options" on the Control Panel
screen is not supported. The installation or uninstallation may not work normally if the language setting is changed.
• Enable the .NET Framework 3.5 (including .NET 2.0 or 3.0) in "Turn Windows features on or off" on the control panel.
• A network drive cannot be specified as the installation destination.
• When the parameters have been set with the utility installed, the parameters are initialized at installation. Save the
parameters with the save file function before installing the utility.
• When the software package has been installed in the environment that the creation of 8.3 filename is disabled, the software
package may not be uninstalled. Enable the creation of 8.3 filename before installing the software package. For the method
on how to check and change the status of 8.3 filename creation to enable/disable, refer to the website of Microsoft
Corporation.
• When using SW1DNC-CCIEF-B Version 1.10L or later, apply Service Pack1 and Security Update for Windows
(KB3033929) to Windows 7 and Windows Server 2008 R2.
• To Windows Server 2016, apply Windows Updates (KB4132216, KB4091664, KB4465659, and KB4480977).
• When installing the software package, enable "User Account Control: Detect application installations and prompt for
elevation" in 'Local Security Policy' in Windows.
6.2

Installation

The following explains a procedure for installing the software package.

Installation procedure

1.
Insert the CD-ROM to the CD-ROM drive.
2.
Double-click the "Setup.exe" file on the CD-ROM.
3.
By the on-screen instructions, select or enter the necessary information. Refer to the following section when the screen
for which corrective action is not clear, is displayed.
Page 145 Action displayed on the screen is not effective while installation
4.
Restart the personal computer.
6 INSTALLING AND UNINSTALLING SOFTWARE PACKAGES
80
6.1 Installation and Uninstallation Precautions

update may start automatically. Please install the driver after changing the setting of the