Changing The Address Display - Siemens SINUMERIK 840D sl Operating Manual

Edit PLC user program (828D only)
21.5 View of the program blocks
The "Progress status" display is also controlled using the "Program stat." softkey
Colors for displaying the program status
In the progress status, different colors are used to display information.
Display
Signal flow of the busbar when the status is active
Signal flow in the networks
All operations that are active and that are executed without
error (corresponds to the signal flow)
Status of the Boolean operations (corresponds to the signal
flow)
Timers and counters active
Error during execution
No signal flow
No network executed
STOP operating state
Procedure
21.5.5

Changing the address display

You can select between specification in absolute or symbolic address.
Elements for which there are no symbolic identifiers are automatically displayed with absolute
identifiers.
418
1. The program block view is open.
2. Press the "Program stat." softkey to display the program status display
in the status display.
3. Press the "Program stat." softkey again to hide the program status display
in the status display again.
Color
Blue
Blue
Blue
Blue
Green
Red
Gray
Gray
Gray
Operating Manual, 05/2017, A5E40869190
Grinding