Creating A Program List - Siemens SINUMERIK 840D sl Operating Manual

Comment
Comments are identified in the job list by ";" at the start of the line or by round brackets.
Template
You can select a template from Siemens or the machine manufacturer when creating a new
job list.
Executing a workpiece
If the "Select" softkey is selected for a workpiece, the syntax of the associated job list is checked
and then executed. The cursor can also be placed on the job list for selection.
Procedure
14.4.7

Creating a program list

You can also enter programs in a program list that are then selected and executed from the
PLC.
The program list may contain up to 100 entries.
Grinding
Operating Manual, 05/2017, A5E40869190
1. Select the "Program manager" operating area.
2. Press the "NC" softkey, and in directory "Workpieces" place the cursor
on the program for which you wish to create a job list.
3. Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4. Select entry "Job list JOB" from the "Type" selection field and enter a
name and press the "OK" softkey.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
14.4 Creating a directory / program / job list
Managing programs
319