Create Multitool - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

13.14.2

Create multitool

The multitool can be selected in the list of special tool types.
Figure 13-11 Selection list for special tools with multitool
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
1.
The tool list is opened.
2.
Position the cursor at the position where the tool is to be created.
For this, you can select an empty magazine location or the NC tool
storage outside the magazine.
You may also position the cursor on an existing tool in the NC tool
storage area. Data from the displayed tool will not be overwritten.
3.
Press the "New tool" softkey.
The "New Tool - Favorites" window opens.
4.
Press the "Special tool 700-900" softkey.
5.
Select the multitool and press the "OK" softkey.
The "New Tool" window opens.
6.
Enter the multitool name and define the number of multitool loca‐
tions.
If you wish to define the distance of the tools based on the angle,
select the "Angle input" check box, and for each multitool location,
enter the distance to the reference location as an angle.
Manage tools
13.14 Working with Multitool
295

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents