Displaying Symbol Tables - Siemens SINUMERIK 840D sl Operating Manual

Edit PLC user program (828D only)

21.6 Displaying symbol tables

The following information is listed:
● Names
● Absolute addresses
● Comments
The symbol information table remains empty for networks that do not contain any global
symbols.
Procedure
21.6 Displaying symbol tables
You can display the symbol tables that are used to obtain an overview of the global operands
available in the project.
The name, address and possibly also a comment is displayed for each entry.
Procedure
430
1. The ladder diagram display (LAD) is open.
2. Select the desired network and press the "Symbol info" softkey.
The "Network Symbol Information Table" window appears.
3. Use the cursor keys to move within the table.
1. Ladder add-on tool is open.
2. Press the "Symbol table" and "Sym. tab. selection" softkeys.
The list with the symbol table entries is displayed.
3. Select the desired table and press the "Open" softkey.
The table is displayed.
4. Use the cursor keys to select the desired entry.
Operating Manual, 05/2017, A5E40869190
Grinding