Siemens SINUMERIK 840D sl Operating Manual page 254

Multi-channel view
12.3 Multi-channel view for large operator panels
3- or 4-channel view in the "Machine" operating area
Use the multi-channel view settings to select the channels and specify the view.
Channel view
3-channel view
4-channel view
Toggling between the channels
Note
2-channel display
Unlike the smaller operator panels, the T,F,S window is visible for a 2-channel view in the
"Machine" operating area.
Program operating area
You can display as many as ten programs next to each other in the editor.
Displaying a program
You can define the width of the program in the Editor window using the settings in the editor.
This means that you can distribute programs evenly - or you can widen the column with the
active program .
254
Display in the "Machine" operating area
The following windows are displayed one above the other for each channel:
● Actual Value window
● T,F,S window
● Block Display window
Selecting functions
● The T,F,S window is overlaid by pressing one of the vertical softkeys.
The following windows are displayed one above the other for each channel:
● Actual Value window
● G functions (the "G functions" softkey is omitted). "All G functions" is
accessed with the Menu forward key.
● T,S,F window
● Block Display window
Selecting functions
● The window showing the G codes is overlaid if you press one of the vertical
softkeys.
Press the <CHANNEL> key to toggle between the channels.
Press the <NEXT WINDOW> key to toggle within a channel column be‐
tween the three or four windows arranged one above the other.
Operating Manual, 05/2017, A5E40869190
Grinding