Siemens SINUMERIK 840D sl Operating Manual page 275

The tool creation sequence can be defined differently.
Unloading a tool in a file
According to the corresponding setting, after having been read out, the unloaded tool is deleted
from the NC memory.
Deleting a tool in a file
Grinding
Operating Manual, 05/2017, A5E40869190
1. The tool list is opened.
2. Place the cursor on the tool that you would like to unload from the mag‐
azine and press the "Unload" and "In file" softkeys.
3. Navigate to the required directory and press the "OK" softkey.
4. Enter the required file name in the "Name" field and press the "OK" soft‐
key.
The field is preassigned with the tool names
The tool is unloaded and the data of the tool are written to the file.
1. The tool list is opened.
2. Position the cursor on the tool that you wish to delete.
3. Press the "Delete tool" and "In file" softkeys.
3. Navigate to the required directory and press the "OK" softkey.
4. Enter the required file name in the "Name" field and press the "OK" soft‐
key.
The field is preassigned with the tool names
The tool is unloaded and the data of the tool are written to the file. The
tool is then deleted from the NC memory.
Manage tools
13.5 Tool list
275