Siemens SINUMERIK 840D sl Operating Manual page 277

Tool parameters
Column heading
Location
W
L
B
BS
*
* If activated in magazine
selection
Type
Tool name
ST
D
Δ length X, Δ length Z
- Cylindrical grinding
Δ length Y, Δ length Z
- Surface grinding
Δ cutting edge radius
Δ Ø
Δ outer Ø
T C
Grinding
Operating Manual, 05/2017, A5E40869190
Meaning
Magazine/location number
● The magazine location numbers
● Transfer location
● Loader
● Loading station
● Load position in the load magazine
The following icons can also be displayed for other magazine types (e.g.
for a chain):
*
● Spindle location as an icon
● Locations for gripper 1 and gripper 2 (this applies only when a spindle
Tool type
Depending on the tool type (represented by an icon), certain tool offset
data is enabled.
The tool is identified by the name and the sister tool number. You can enter
the name as text or number.
Note: The maximum length of tool names is 31 ASCII characters. The
number of characters is reduced for Asian characters or Unicode charac‐
ters. The following special characters are not permitted: | # ".
Sister tool number (for replacement tool strategy).
Cutting edge number
Wear for length X or wear for length Z
Wear for length Y or wear for length Z
Tool wear of the cutting edge radius
(for grinding wheel - type 400, type 410; dresser - type 490, dressing roller
- type 495, dressing wheel - type 497)
Tool wear of the diameter
(for 3D-probe - type 710; edge-probe - type 711; mono-probe - type 712;
L-probe - type 713; calibration tool - type 725)
Tool wear of the outer diameter
(for star-type probe - type 714)
Selection of tool monitoring
- by tool life (T)
- by count (C)
- by wear (W)
- wear, summed offset (S)
The wear monitoring is configured via a machine data item.
Please refer to the machine manufacturer's instructions.
The magazine number is specified first, followed by the location number
in the magazine.
If there is only one magazine, only the location number is displayed.
with dual gripper is used) as icons.
Manage tools
13.6 Tool wear
277