Machining the workpiece
6.10 Editing a program
Setting
Highlight selected G
code commands
Font size
Note
All entries that you make here are effective immediately.
Requirement
You have opened a program in the editor.
Procedure
144
Meaning
Defines the display of G code commands.
● No
All G code commands are displayed in the standard color.
● Yes
Selected G code commands or keywords are highlighted in color. Define
the rules for the color assignment in the sleditorwidget.ini configuration
file.
Note: Please observe the information provided by the machine
manufacturer.
Note
This setting also has an effect on the current block display.
Defines the font size for the editor and the display of the program sequence.
● auto
If you open a second program, then the smaller font size is automatically
used.
● normal (16) - character height in pixels
Standard font size that is displayed with the appropriate screen
resolution.
● small (14) - character height in pixels
More content is displayed in the editor.
Note
This setting also has an effect on the current block display.
1.
Select the "Program" operating area.
2.
Press the "Edit" softkey.
3.
Press the ">>" and "Settings" softkeys.
The "Settings" window opens.
4.
Make the required changes.
Operating Manual, 05/2017, A5E40869190
Grinding