Unloading a multitool
13.14.7
Positioning multitool
You can position a magazine. In this case, a magazine location is positioned to the loading
point.
Multitools that are located in a spindle can also be positioned. The multitool is rotated to bring
the affected multitool location into the machining position.
Procedure
13.14.8
Relocating a multitool
Multitools can be directly relocated to another magazine location within magazines, which
means that you do not have to unload multitools with the tools in question from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty location.
You may also directly specify an empty magazine location.
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
2.
Position the cursor on the multitool that you wish to unload from
the magazine.
3.
Press the "Unload" softkey.
The multitool is removed from the magazine and is saved in the
NC memory at the end of the tool list.
1.
The magazine list is opened.
The multitool is in the spindle.
2.
Position the cursor on the multitool location that you want to bring
into the machining position.
3.
Press the "Position multitool" softkey.
1.
Select the "Parameter" operating area.
2.
Press the "Magazine" softkey.
3.
Position the cursor at the multitool that you wish to relocate to a
different magazine location.
Manage tools
13.14 Working with Multitool
299