Siemens SINUMERIK 840D sl Operating Manual page 228

Programming technology functions
9.4 Oscillating cycles (CYCLE4071 ... CYCLE4079)
Figure 9-5
Figure 9-6
Example
Oscillation with:
● 0.02 mm infeed depth at the start
● 0.01mm infeed depth at the end
● Total infeed depth 1 mm
● 100 mm stroke
● Infeed feedrate 1 mm/min
● Transverse feedrate 1000 mm/min
● 1 second sparking-out time
● Standard geometry axes
228
Total infeed depth reached with infeed at the second reversal point
Total infeed depth reached with infeed at the first reversal point
Operating Manual, 05/2017, A5E40869190
Grinding