Siemens SINUMERIK 840D sl Operating Manual page 160

Machining the workpiece
6.12 Display and edit user variables
Example
DEF NCK INT ZAEHLER1 = 10
GUDs are defined in files with the ending DEF. The following file names are reserved for this
purpose:
File name
MGUD.DEF
UGUD.DEF
GUD4.DEF
GUD8.DEF, GUD9.DEF
Procedure
Note
After each start-up, a list with the defined UGUD variables is displayed in the "Global User
Variables" window.
160
Meaning
Definitions for global machine manufacturer data
Definitions for global user data
User-definable data
User-definable data
1. Select the "Parameter" operating area.
2. Press the "User variable" softkey.
3. Press the "Global GUD" softkeys.
The "Global User Variables" window is displayed. A list of the defined
UGUD variables will be displayed.
- OR -
Press the "GUD selection" softkey and the "SGUD" to "GUD6" softkeys
if you wish to display SGUD, MGUD, UGUD as well as GUD4 to GUD 6
of the global user variables.
- OR -
Press the "GUD selection" and ">>" softkeys as well as the "GUD7" to
"GUD9" softkeys if you want to display GUD 7 to GUD 9 of the global
user variables.
Operating Manual, 05/2017, A5E40869190
Grinding