Creating A New Dressing Program - Siemens SINUMERIK 840D sl Operating Manual

Managing programs
14.4 Creating a directory / program / job list
Procedure
14.4.4

Creating a new dressing program

You can create dressing programs and then render G code blocks for them in a directory/
workpiece.
Procedure
316
1. Select the "Program manager" operating area.
2. Select the desired storage location and position the cursor on the folder,
in which you would like to store the program.
3. Press the "New" softkey.
The "New G Code Program" window appears.
4. If necessary, select a template if any are available.
5. Select the file type (MPF or SPF).
If you are in the NC memory and have selected the file "Subprograms"
or "Part programs", you can create only one subprogram (SPF) or main
program (MPF) respectively.
6. Enter the desired program name and press the "OK" softkey.
Program names may be a maximum of 24 characters in length.
You can use all letters (with the exception of special characters, language-
specific special characters, Asian or Cyrillic characters), numbers and
underscores (_). The program type is appropriately specified.
1. Select the "Program manager" operating area.
2. Select a storage location and place the cursor on the "Dressing programs"
folder.
3. Press the "New" softkey.
The "New Dressing Program" window opens.
The "DRS" file type is set as default.
Operating Manual, 05/2017, A5E40869190
Grinding